MS Molded Cable Boots: Shapes and Materials
MS molded boots cover straight, right-angle, T, Y, multi-branch, step, long-neck and special shapes, with hot-melt adhesive pre-coated on the inner wall. A single heat application seals, relieves strain and provides mechanical protection; more than 30 shape series are available in polyolefin, oil-resistant rubber and fluororubber.
600V
Withstand voltage
Specifications
Key specifications
| Part number | molded boot |
|---|---|
| Withstand voltage | 600V |
Performance
Typical test data
| Test item | -4 | -12 | -25 | -71 | -100 |
|---|---|---|---|---|---|
| Elongation at break(%) | ≥450 | ≥350 | ≥350 | ≥300 | ≥250 |
| Density(g/cm³) | 1.1±0.1 | 1.0±0.1 | 1.1±0.1 | 1.2±0.1 | 1.3±0.1 |
| Heat shock300°C/4h | — | No cracks | — | — | — |
| Volume resistivity(Ω·cm) | ≥1×10¹⁰ | ≥1×10¹⁰ | ≥1×10¹⁰ | ≥1×10¹⁰ | ≥1×10¹⁰ |
| Flame rating | — | V-1 | — | — | — |
| Copper corrosion | 150±5°C/168hPass | 150±5°C/168hPass | 150±5°C/168hPass | 150±5°C/168hPass | 150±5°C/168hPass |
Applications
Where it is used
- Connector backshell sealing
- Cable breakout protection
- Circular connector assemblies
- Aerospace and defense
- Right-angle and straight boots
- Marine and telecom equipment
Next step
Request a datasheet, sample or quote
Send the size range, operating temperature and delivery requirement. We will reply with the recommended construction, wall thickness, shrink ratio and a sample plan.