Sealing Tapes & Adhesives
Used with tubing and molded boots: YJS120 (120 °C) and YJS200 (200 °C) sealing tapes relieve strain and seal backshells, YJS150 two-part adhesive bonds oil-resistant and fluororubber parts, and YJLY3000 silicone self-amalgamating tape insulates busbars and electrical joints.
Tapes and adhesives
YJS120
Sealing tape for backshell strain relief and sealing at 120 °C.
YJS200
High-temperature sealing tape rated to 200 °C.
YJS150
Two-part adhesive for oil-resistant and fluororubber bonding.
YJLY3000
Silicone self-amalgamating tape for busbar and electrical-joint insulation.
Products in this family
Open a product for its construction, temperature range, size table and test data.
YJLY3000 Irradiation-Cross-Linked Silicone Self-Amalgamating Tape
YJLY3000 is an irradiation cross-linked silicone tape for -60 to 250 °C continuous service, withstanding 300 °C short-term surges.
YJS120 Sealing Tape for Molded Boots
YJS120 bonds to molded boots, plugs and cable jackets and, once heated, provides both strain relief and a seal.
YJS150 Two-Part Adhesive for Heat-Shrink Systems
YJS150 is a two-part adhesive for bonding and sealing oil-resistant and fluororubber tubing to molded boots.
YJS200 High-Temperature Sealing Tape (200 °C)
YJS200 is a 200 °C sealing tape for high-temperature backshells and strain relief, matched to -12 material class boots and YJVT200 fluororubber tubing.
Request a datasheet, sample or quote
Send the size range, operating temperature and delivery requirement. We will reply with the recommended construction, wall thickness, shrink ratio and a sample plan.