Shielded Solder-Ring Splices
YJSO63, YJSO175 and YJSO200 integrate a solder ring, flux, hot-melt seal and transparent insulating sleeve. Hot-air heating completes the ground connection between shield and conductor in one step. Three temperature series (150 °C, 175 °C, 200 °C) are available and the family follows SAE AS83519/2.
Three temperature series
YJSO63
150 °C shielded solder-ring splice for standard shielded-cable grounding.
YJSO175
175 °C version for higher-temperature harnesses.
YJSO200
200 °C version for engine and high-temperature zones.
Products in this family
Open a product for its construction, temperature range, size table and test data.
YJSO63 / YJSO175 / YJSO200 Shielded Solder-Ring Splices
YJSO splices combine a shielded solder ring with a transparent sleeve to keep shield continuity, insulation and strain relief in one part, to SAE AS83519/2.
Request a datasheet, sample or quote
Send the size range, operating temperature and delivery requirement. We will reply with the recommended construction, wall thickness, shrink ratio and a sample plan.